CleanCide Wipes

Sizes: Small and Large; 12 Canisters per Case

SDS & Literature

A powerful EPA-registered citric acid based germicidal wipe that cleans and disinfects in oneeasy step. Virucidal, bactericidal, fungicidal, and tuberculocidal.

  • Active ingredient: Citric Acid
  • Available in 2 convenient cloth sizes (10” X 12” 60 count / 6” X 6.75” 160 count)
  • Kills 99% of household germs
  • Eliminates odor-causing bacteria
  • Sanitizes in 1 minute
  • Mets OSHA Requirements for Bloodborne Pathogens
  • HMIS ratings (health, reactivity, fire and protection) are all “0”
  • Low pH
  • Germicidal, fungicidal, virucidal in the presence of 5% blood serum
  • Efficacy against antibiotic resistant organisms
  • Effective against NoroVirus
  • Tuberculocidal on pre-cleaned surfaces
  • Excellent cleaner
  • Hard, nonporous surfaces
  • Ideal for schools, daycare, nurseries andbehavioral health
  • Stainless steel, chrome, glass, plastic and vinyl
  • Doorknobs, bedrails, light switches, rail by toilet, call button, telephone, monitor controls, faucet handles, equipment trays, and monitoring equipment
  • Procedure tables, examination tables, exercise mats, commode chairs, chairs, counter, bed and stretchers

Directions for use

A two-step process of cleaning prior to disinfection is required only when surfaces are grossly soiled or there is the possibility of contamination with blood or body fluid. Clean-Cide Wipes can be used for both cleaning and disinfecting.

  1. Always wear gloves when cleaning. These wipes are for cleaning surfaces, not for use on skin. Wear a cover gown and face protection in addition to gloves if cleaning up a large body fluid spill.
  2. Pull cloth wipe from the container at 90o angle making certain to position the wipe between the two pointing arrows appearing on the lid. This permits easy separation of cloths at perforation.
  3. Unfold cloth and wipe surfaces until visibly wet. Allow solution to air dry.
    • Do not wipe the surface dry prior to adequate contact time. Wexford disinfectants contain humectants which evaporate slowly to prolong drying time. Although the surfaces may appear dry, there is still dampness or moisture present. This ensures complete bacteria kill.
  4. Wipe or rinse any residual, after sufficient contact time, from shiny surfaces if needed.
  5. Keep small center cap closed to prevent moisture loss from container.

Procedure for Cleaning and DisinfectingUsing Wexford CleanCide WipesOn Equipment and Cords

CleanCide Wipes are for cleaning surfaces only, not for use on skin.

Pull cloth wipe from the container at 90o angle making certain to position the wipe between the two pointing arrows appearing on the lid. This permits easy separation of cloths at perforation.

Unfold cloth.

Start at the connectors and wet down but do not saturate the cables while wiping away from the connectors. It is sometimes necessary to wring out the towelettes to avoid excess fluid on the cables. Allow solution on cables to air dry.

Do not allow any solution from the towelettes to drip into the cord connectors.

If pooling occurs at the cord connectors, allow adequate contact time and then dry the connectors before reuse.

Cords and equipment should not be saturated.

Do not wipe the surface dry prior to adequate contact time.

Wipe or rinse any residual, after sufficient contact time, if needed.

Allow cords to dry before packaging the equipment for reuse.

Keep small center cap closed to prevent moisture loss from container.

A two-step process of cleaning prior to disinfection is required only when surfaces are grossly soiled or there is the possibility of contamination with blood or body fluid. CleanCide Wipes can be used for both cleaning and disinfecting.

CAS Number Ingredient Name for Website Function
7732-18-5 Water Solvent
142-31-4 Sodium Octyl Sulfate Surfactant
79-33-4 Lactic Acid Acidifier
617-48-1 Malic Acid Acidifier
64-19-7 Acetic Acid Acidifier
112-05-0 Pelargonic Acid Acidifier, defoamer
77-92-9 Citric Acid Active ingredient
68439-57-6 Sodium C14-16 Olefin Sulfonate Surfactant
68037-05-8 Ammonium C6-10-alkyl polyoxyethylene sulfate Surfactant
68131-39-5 C12-15 Alcohols Ethoxylated Surfactant